Digital Comparable Electronic Coin Selector Front Inserting Type Coin Acceptor
S-071CS
HI-0711CS(FOR EURO COIN)
INSTALLATION
Step 1
Change the right coin for use from the clamp.
Step 2
Adjust the right inset size for use form the front panel back side.
Step 3
Select the right mode: Normal Open/Normal Close
“TIMER SWITCH” for synchronizing your system
100ms(Slow Speed/Long Pulse)
50ms(Medium Speed/Medium Pulse)
30ms(Fast Speed/Short Pulse)
Step 4
Adjust VR turning(about LED meaning):
Clockwise: slack selection, dark→light
Anti-clockwise: strict selection, light→dark
Step 5
5 lines with 4 pins
Counter
Gray Line[Counter(+/-)]
Red Line(DC+12V)
White Line(Coin Signal)
Black Line[GND(Ground)]
Gray Line[Counter(+/-)]
※ Before using, the plastic coin to be instead of a coin which you need, the to use.
COIN SPECIFICATION
Diameter: 18mm-31mm
Thickness: 1.2mm-3.0mm
USER EQUIPMENT
Voltage: DC 12V±20%
Currents: 200mA
LED Light Display:
1. Normal(Green LED)
2. True Coin(Green LED Flash)
3. Error Coin(Red LED Flash)
4. Anti-Stringing Protect(Keep Out Of LED)
